The galvanized coil is immersed in a molten zinc bath to adhere a thin layer of zinc to the surface. At present, it is mainly produced by a continuous galvanizing process, that is, a coiled steel plate is continuously immersed in a zinc-plated plating tank to form a galvanized steel sheet; an alloyed galvanized steel sheet. This steel sheet is also produced by hot dip, but immediately after it is discharged, it is heated to about 500 ° C to form an alloy coating of zinc and iron. This galvanized roll has good adhesion and weldability of the coating.Galvanized Steel Coil Supplier
Use of galvanized coil: The coated steel sheet has light weight, beautiful appearance and good anti-corrosion performance, and can be directly processed. It provides a new type of raw material for the construction industry, shipbuilding industry, vehicle manufacturing industry, furniture industry and electrical industry. It has played a good role in replacing steel with steel, efficient construction, saving energy and preventing pollution. The color coated steel plate using the galvanized steel plate as the substrate, in addition to the zinc protection, the organic coating on the zinc layer serves as a covering effect to prevent the steel plate from rusting and has a longer service life than the galvanized steel plate. The service life of the steel plate is 50% longer than that of the galvanized steel sheet. However, in different regions and different parts of use, the use of the same galvanizing amount, the same coating, the same coating thickness of the color coated board, the service life will be very different.
For example, in industrial areas or coastal areas, due to the action of sulfur dioxide gas or salt in the air, the corrosion rate is accelerated and the service life is affected. During the rainy season, the coating is wetted by rain for a long time, or it is corroded faster and the service life is reduced in the parts where the temperature difference between day and night is too high and condensation is formed. Buildings or buildings made of color-coated steel sheets are often used for long periods of time when washed with rain. Otherwise, they are affected by the action of sulfur dioxide gas, salt and dust. Therefore, at the time of design, if the inclination of the roof is larger, the dirt is less likely to accumulate dirt and the like, and the service life is longer; for those areas or parts that are not washed frequently by rain, it should be washed regularly with water.